Disconnect power and retract tool fully; remove bit with pliers. To insert new bit, retract tool fully and insert bit all the way into tool.
*Note: Impact drivers may not set screws to the correct depth and may cause the locking ring to come loose. Standard drills are recommended for use with the Smart-Bit Depth Setter.
Product Features
Free-Spinning Stop Collar with O-ring
The Smart-Bit stop collar spins free of the drill bit, preventing marring or burnishing of the deck surface. When the stop collar stops spinning, the hole is complete.
Anti-Clog Debris Cavity
The Smart-Bit debris cavity gathers waste material, keeping it clear of the countersink, unlike conventional flush mounted countersinks. The waste simply falls out onto the deck surface after each hole is completed.
Powerbolic® High-Speed Drill Bit
The Powerbolic bit has specially designed fluting that cuts through decking more than twice as fast as standard wood bits.
Pre-set Countersink
Smart-Bit matches the head diameter, head angle and countersink depth of corresponding Headcote and Deckfast Stainless screws for the perfect hole and fit./p>
Replaceable Bit
Smart-Bit tools come with two extra Replacement Bits and a 3/32” hex wrench for use with the set screw that holds the drill bits in place. Replacement Bits are also sold separately.
Pre-set Shaft Length
Together with the countersink, the overall hole depth for the #7 Trim, #8 Trim and #10 Flat sizes is 1-1/8” deep, designed for use with lumber up to 5/4” (nominal).
Instructions
General Use
The hole is complete when the collar stops spinning. To clean the debris cavity, hold the free-spinning stop collar in one hand and run the drill away from the work surface. The waste material will simply eject itself.
Extending the Life of the Drill Bit
To extend the life of the drill bit, drill in a straight and stable fashion. Two-handed operation is highly recommended. Drilling into ipe or similarly dense materials can be hard work. Rest as needed and don't sacrifice stability for speed!
.jpg)
[ITEMPRICE]