The Simpson Strong-Tie® LUS28-2SS is a face-mount hanger for double (two-ply) joists, made from 18-gauge Type 316L stainless steel. The flanges fasten to the face of the beam or ledger and the wide seat carries a doubled 2x8 or 2x10 from below. Its double-shear nailing design drives joist nails through two layers of steel for high load capacity with fewer fasteners. Use it for doubled joists and built-up members on coastal decks, docks and anywhere salt air or treated lumber would corrode galvanized hardware.
Install with stainless fasteners only. Galvanized or carbon-steel nails corrode in contact with stainless and defeat the purpose of the hanger. Use 316 stainless 16d ring-shank common nails (3-1/2" x .162") in the size and quantity Simpson’s installation specs call for, and fill every fastener hole. Do not bend or remove the tabs.
For a single 2x8 or 2x10 joist, use the LUS28SS. For double 2x6 or 2x8, see the LUS26-2SS; for double 2x10 or 2x12, see the LUS210-2SS. Browse all stainless face-mount joist hangers, or see concealed and 45° skewed hangers.